Home/Technologies/Understanding Electrophoresis and Cataphoresis: Industrial Applications and Coating Technologies
Technologies

Understanding Electrophoresis and Cataphoresis: Industrial Applications and Coating Technologies

Electrophoresis is the movement of charged particles in an electric field, widely used for coating technologies. This guide explains how electrophoresis and cataphoresis work, their roles in corrosion protection, and how they compare to electroplating and powder coating in industrial applications.

Nov 15, 2026
6 min
Understanding Electrophoresis and Cataphoresis: Industrial Applications and Coating Technologies

Electrophoresis is the directed movement of charged particles in an electric field. In industry, this process is widely used, for example, to apply an anti-corrosion primer to a car body. The body is immersed in a bath with the primer composition and voltage is applied. The particles move toward the metal, forming a protective film on its surface. This method ensures the primer reaches exterior panels, welded seams, and recesses wherever the liquid can penetrate.

What Is Electrophoresis and Why Do Particles Move?

How Particle Charge Determines the Direction of Movement

Imagine a bath filled with liquid in which tiny charged particles are suspended. When a constant voltage is applied to two electrodes submerged in the bath, an electric field forms between them. This field acts on the particles and causes them to move relative to the liquid.

Positively charged particles move toward the negative electrode-the cathode. Negatively charged particles head toward the positive electrode-the anode. If the polarity of the electrodes is reversed, the direction of particle movement also reverses.

What Affects the Speed of Particle Movement

With a constant liquid composition and moderate field strength, the basic rule is: the stronger the electric field, the faster the particles move. However, two different particles in the same field may travel at different speeds. This difference is described by electrophoretic mobility-the ratio of a particle's directed speed to the field strength.

Mobility depends on the electrical properties of the particle's surface and the properties of the liquid itself. For example, a more viscous liquid resists movement more strongly. The acidity (pH) of the medium can also affect speed: for some materials, changing the pH alters the surface charge of the particles.

How Electrophoretic Deposition Creates Coatings

How Particles from a Suspension Form a Layer on a Part

A metal part is immersed in a bath with a suspension-a liquid containing finely dispersed coating material particles. The part is connected to a direct current source, becoming one of the electrodes. The electric field directs the particles toward its surface, where they deposit and form a layer.

During cataphoretic coating, a chemical reaction also plays a role. At the surface, water is reduced, creating a more alkaline environment. This causes the polymer binder to lose solubility and deposit on the metal along with the pigment.

Why the Coating Is Even and What Determines Its Thickness

As the polymer film grows, its electrical resistance increases. Less current passes through already coated areas, so deposition slows down there. On thinner areas, the film continues to grow faster. This gradually evens out thickness differences.

The thickness of the layer is controlled by the applied voltage and the time spent in the bath. Other factors include the composition of the primer, the conductivity of the liquid, and the shape of the part. For example, through a narrow opening, the bath may fill a cavity, but the field strength deep inside will be weaker, so the layer may be thinner than on external surfaces.

What Is Cataphoresis and How Are Car Bodies Primed?

Cataphoresis and Anaphoresis: Changing the Polarity of the Part

Cataphoresis is an electrophoretic coating process in which the part acts as the cathode. It is connected to the negative terminal of a power source, attracting positively charged particles of the coating. In anaphoresis, the part serves as the anode, and a composition with negatively charged particles is used.

Cataphoresis is widely used for anti-corrosion priming of car bodies. During anodic application, the metal part may partially dissolve. The cathodic scheme avoids this issue, preventing anodic dissolution of the car body during priming.

How Cataphoretic Painting of Car Bodies Works

  • Surface preparation. Oils and contaminants are removed from the body, then it is washed. Phosphating creates a thin layer on the metal that improves primer adhesion and helps protect against corrosion.
  • Primer application. The body is immersed in a bath with a water-based primer and voltage is applied. The composition penetrates door cavities and other hard-to-reach places if the liquid can enter and air can escape.
  • Rinsing. After the bath, any remaining composition and liquid are rinsed from the body. Some of the rinsed-off material is returned to the bath.
  • Thermal curing. The body passes through an oven. Upon heating, the polymer binder cures, turning the deposited layer into a durable protective film.

The cataphoretic primer creates a barrier between the metal and moisture. To learn how priming is combined with other protection methods, check out the article Corrosion Protection for Metals: Effective Methods and Modern Technologies.

What Coatings Are Produced by Electrophoretic Deposition?

Polymer Coatings for Metal Parts

The choice of composition depends on the coating's intended role. Epoxy compositions are commonly used for priming: the cured film adheres well to metal and protects it from corrosion. Liquid or powder paint can be applied on top. For exterior parts where the electrophoretic layer serves as the finish, acrylic compositions with higher UV resistance are used.

Ceramic Coatings from Suspensions

Liquid media can also contain ceramic powder particles, such as aluminum oxide or zirconium dioxide. The electric field carries them to the surface, where they form a tightly packed layer. This technique is used, for example, to create thin ceramic layers for solid oxide fuel cells.

After deposition, the layer is dried. If a dense ceramic is needed, it is then sintered: upon heating, the particles fuse, reducing porosity. The sintering regime is selected based on the properties of both the powder and the substrate.

How Cataphoresis Differs from Electroplating and Powder Coating

Cataphoresis vs. Electroplating: Polymer Layer and Metal Coating

In both processes, the part is immersed in a bath and connected to a power source. With cataphoretic painting, a polymer composition is deposited on the surface and, after curing, forms a protective film. With electroplating, metal ions from the solution receive electrons at the part's surface and create a metallic layer. For example, steel can be coated with zinc for corrosion protection or nickel for decorative purposes.

To learn how metals are chosen for deposition and the properties they impart, see the article Electroplating: Functions, Technology, and Types of Metallization.

Cataphoresis vs. Powder Coating: Immersion and Spraying

In cataphoresis, the composition's particles move toward the part in a liquid. In electrostatic powder coating, a sprayer charges dry powder, and its particles travel through the air to a grounded part. In the oven, the powder melts, flows over the surface, and forms a continuous film.

Both technologies can be used on the same part. For example, a steel frame with recesses may first receive a cataphoretic primer for corrosion protection, followed by a powder coating to provide color and surface texture.

Conclusion

Electrophoresis enables the targeted delivery of charged particles to a part's surface, while electrophoretic deposition turns them into a functional coating. When choosing a technology, it's important to consider where and why the layer is needed. For anti-corrosion priming of parts with seams and fluid-accessible cavities, cataphoresis is suitable. If a zinc or nickel layer is required, electroplating is used. When color and surface texture are important, powder coating is chosen-often applied over a cataphoretic primer.

Tags:

electrophoresis
cataphoresis
industrial-coating
corrosion-protection
metal-finishing
electroplating
powder-coating
automotive-industry

Similar Articles

Loading...
Electrophoresis & Cataphoresis: Coating Processes Explained