Home/Technologies/Vacuum Casting Explained: Process, Applications, and Benefits
Technologies

Vacuum Casting Explained: Process, Applications, and Benefits

Vacuum casting is a manufacturing technique for producing precise prototypes and small-batch parts with reduced defects. This guide details the step-by-step process, material choices, applications in plastics and metals, and how vacuum casting compares to 3D printing and injection molding for different production needs.

Nov 15, 2026
4 min
Vacuum Casting Explained: Process, Applications, and Benefits

Vacuum casting is a manufacturing method used to produce precise parts and reduce the number of defects by lowering the pressure to remove air from the liquid material or the mold cavity. In plastic casting, this approach helps minimize bubbles and fills even the smallest features of the mold. It's commonly used for prototypes and small-batch production of parts such as device housings and transparent diffusers.

How Vacuum Casting of Plastics Works

Master Model and Silicone Mold

The process starts with the creation of a master model-a sample of the future part. This model is either 3D printed or CNC milled. Before pouring silicone, the surface is finished to the desired quality, as the mold copies both fine textures and any marks from printing or machining.

For models with intricate details, photopolymer 3D printers are often used. To learn how these printers build surfaces layer by layer, see the article SLA Printing: How Photopolymer 3D Printing Works and Where It's Used.

The master model is encased in liquid silicone. Once cured, the mold is cut along a pre-marked line, and the sample is removed. Channels are made in the mold for pouring the casting material and for venting air.

Degassing, Pouring, and Curing

When mixing polyurethane components, air gets trapped in the liquid. Inside a vacuum chamber, the pressure drops, causing bubbles to expand, rise to the surface, and burst-a step known as degassing.

The mixture is then poured into the mold under reduced pressure. With the cavity pre-evacuated, air is less likely to remain in recesses where the resin needs to flow. After curing, the mold is opened, the part removed, and the sprue-the solidified remainder in the pour channel-is trimmed off.

What Parts Are Cast from Polyurethane?

Rigid polyurethane is used for device housings and snap-on covers. For seals, soft pads, and protective cases, an elastic compound is chosen. If a part must flex during assembly or resist impact, resin selection focuses on hardness, elongation at break, and impact strength.

For transparent windows and light guide prototypes, clear polyurethane resins are used. The master model affects the appearance-the mold transfers even tiny scratches, which can scatter light.

What Determines the Accuracy and Quality of a Casting?

The dimensions of the casting depend on the accuracy of the master model and the shrinkage of both the silicone (when making the mold) and the polyurethane (during curing). Excessive clamping force can deform a soft mold, and as the mold wears out, it reproduces fine features less accurately. For parts where assembly precision is critical, trial castings are primarily checked for fit and the position of mounting holes.

Bubbles can also form while filling the mold. Even after degassing, air may remain trapped in blind cavities. That's why vent channels are placed where air tends to accumulate during pouring. If the mixture thickens before reaching thin sections, parts of the component may be incomplete.

How Vacuum Is Used in Metal Casting

One method of vacuum casting metals is investment casting. A wax model is coated with a ceramic slurry; after the wax is removed, a heat-resistant mold is obtained. During pouring, reduced pressure helps evacuate air from the cavity, lowering the risk of gas-related defects.

When Vacuum Casting Is Advantageous Over 3D Printing and Injection Molding

RequirementRecommended Method
Single sample for form and fit testing3D printing. The part can be made directly from a digital model and quickly reprinted after adjustments.
Small batch of identical housings or coversVacuum casting. A single master model is used to make the mold, and resin selection tailors the part's properties.
Large-scale production of thermoplastic partsInjection molding. The cost of tooling is spread over the entire production run.

The cost of vacuum casting includes the master model, mold fabrication, casting, and finishing. Silicone molds wear out, and their lifespan depends on the part's geometry and the resin type. If several molds are needed for the full batch, this should be factored in when comparing per-unit costs.

Conclusion

Vacuum casting in silicone molds is ideal for producing small batches of parts with specific rigidity, flexibility, or transparency requirements. Before starting production, inspect the first casting in assembly. For housings, pay attention to clearances and latch operation; for transparent windows, assess surface quality under working lighting conditions.

Tags:

vacuum casting
plastic casting
prototyping
manufacturing
polyurethane
silicone mold
investment casting
small batch production

Similar Articles

Loading...