Waterjet cutting uses high-pressure water and abrasives to precisely shape metal, stone, and glass without heat. Learn how it works, its materials, and how it compares to laser or plasma cutting. Discover tips for ensuring the best quality and accuracy for your projects.
Waterjet cutting is a technology that allows for the precise shaping of complex parts from metal, stone, and glass using a high-pressure water stream mixed with abrasive particles. This process operates without melting the material, ensuring clean edges and preserving the original properties of the workpiece. For example, you can cut a hole in a steel plate or create decorative openings in a stone countertop using this method.
A powerful pump delivers water to the cutting head at pressures reaching several thousand bar. As the water passes through a tiny orifice, it transforms into a fine, high-velocity jet. Abrasive particles-commonly garnet sand-are introduced in a mixing chamber. The focusing tube then directs this abrasive-laden stream onto the workpiece.
Upon impact, abrasive grains remove tiny fragments from the surface while the water carries them away from the cut. The machine precisely guides the cutting head along the programmed contour so that the jet penetrates through the material and into a collection bath beneath the worktable.
For softer materials such as foam, paper, and some rubbers, pure water under pressure is sufficient. Abrasive is only added when cutting hard materials like steel, granite, or glass.
Waterjet cutting is used for processing carbon steel, stainless steel, aluminum, and titanium. It is ideal for creating flanges, brackets, and complex shapes from sheet metal. This method is especially valuable when you need to preserve the alloy's edge properties, as the removal process is mechanical and creates no heat-affected zone along the cut.
Granite, marble, and porcelain tiles are often shaped with waterjet cutting. The process enables sink cutouts in countertops or custom shapes in tiles. When making initial piercings in brittle slabs, there is a risk of chipping-so the entry point is typically started in a section that will be discarded.
Standard glass sheets can be intricately cut, with openings and notches for fittings. Piercing begins at reduced pressure to minimize cracking risks. All holes and cutouts must be made before tempering; afterward, breaking the surface layer releases internal stresses, which may shatter the entire sheet.
The maximum thickness that can be cut depends on the material, jet power, and the required edge quality. Thicker sheets require slower cutting speeds. If the head moves too quickly, visible grooves may appear on the lower edge, and in corners, the cut line at the bottom may lag behind the top surface.
Precision is influenced by kerf taper-the cut can be wider at the jet's entry point than at the exit, causing slight dimensional differences between the top and bottom surfaces. Advanced machines with tilting heads can adjust the jet angle, producing edges that are nearly vertical.
For parts that must fit precisely in assemblies, technical drawings specify tolerances for critical dimensions. For example, the diameters and relative positions of mounting holes in a flange are essential. If the edge will serve as a reference surface, a separate perpendicularity tolerance is specified relative to the sheet plane.
Laser cutting is often selected for batch processing of thin sheet metal. It quickly traces intricate contours and produces a narrow kerf, allowing parts to be nested closely on a single sheet. However, it does create a heat-affected zone along the edge, which varies with the material and cutting mode.
For insights into how laser pulse duration impacts material heating during micromachining, see our article on femtosecond lasers in precision cutting:
Read the article on femtosecond lasers and cold material cutting
Plasma cutting is used for electrically conductive metals, including thick steel plates. It's suitable for preparing blanks for welding. If a part's edge must fit tightly against another, consider potential bevels and post-processing costs when choosing this method.
Waterjet cutting is preferred for shaping stone, glass, and heat-sensitive metal parts. Achieving a smooth edge on thick materials requires slower feed rates, impacting cost due to machine time and abrasive consumption.
Waterjet cutting is ideal for complex contours in metal, stone, and glass, preserving the metal's edge properties. When ordering, specify the material, thickness, and tolerances for critical dimensions. If comparing cutting methods, request a quote for the finished part with edge finishing included if required.